Pneumatic Seals

Oz Seals

Pneumatic Seals

Pneumatic seals can sometimes be confused for hydraulic seals because of their similar seal profile. The key difference being, Pneumatic seals are being actuated using compressed air. The air for Pneumatic seals are filtered to remove contaminants that may cause corrosion to the cylinder. Pneumatic seals are generally used in high-speed applications where there are high temperatures.

 

Oz Seals manufactures the widest range off Pneumatic rod seals, Pneumatic wiper seals or the combinations of the both Pneumatic wiper and rod seal in one, Pneumatic scraper seals and Pneumatic Piston seals. View more info in the catalogue. For sizes and direct orders, visit Sealnet.


PAA4

Material: ORSP
Speed: 4 m/s
Temperature: -30 to +110°C
Material: NBR
Speed: 4 m/s
Temperature: -30 to +100°C
Material: VITON
Speed: 4 m/s
Temperature: -20 to + 200°C

Features+

  • PAA4 Pneumatic Seal
  • Design is adapted to low speed and high pressure situations
  • Extremely smooth, steady movement with less breakaway
  • Effective sealing whilst providing the option of reducing the weight of the unit

Application

  • Low and medium pressure applications
  • Pressure ring may be extended by the utilization of supporting back up rings

Fluids

  • Mineral based oils, water/glycol and water emulsions

PAF2

Material: MONYT
Pressure: 16 bar
Speed: 1 m/s
Temperature: -30 to +110°C
Material: TMCF
Pressure: 16 bar
Speed: 1 m/s
Temperature: -200 to + 200°C

Features+

  • PAF2 Pneumatic Seal
  • Design is adapted to low speed and high pressure situations
  • Extremely smooth, steady movement with less breakaway
  • Effective sealing whilst providing the option of reducing the weight of the unit

Application

  • Low and medium pressure applications
  • Pressure ring may be extended by the utilization of supporting back up rings

Fluids

  • Mineral based oils, water/glycol and water emulsions

PA1

Material: ORSP
Pressure: 400 bar
Speed: 0.2 m/s
Temperature: -30 to +110°C
Material: NBR
Pressure: 250 bar
Speed: 0.2 m/s
Temperature: -30 to + 100°C
Material:  VITON
Pressure: 250 bar
Speed: 0.2 m/s
Temperature: -20 to + 200°C

Features+

  • PA1 Pneumatic Seal
  • Design is adapted to low speed and high pressure situations
  • Extremely smooth, steady movement with less breakaway
  • Effective sealing whilst providing the option of reducing the weight of the unit

Application

  • Low and medium pressure applications
  • Pressure ring may be extended by the utilization of supporting back up rings

Fluids

  • Mineral based oils, water/glycol and water emulsions

PAV1

Material:  NBR
Pressure: 16 bar
Speed: 1 m/s
Temperature: -30 to +110°C
Material:  VITON
Pressure: 16 bar
Speed: 1 m/s
Temperature: -30 to +110°C
Material: ORSP
Pressure: 16 bar
Speed: 1 m/s
Temperature: -40 to + 1200°C

Features+

  • PAV1 Pneumatic Seal
  • Design is adapted to low speed and high pressure situations
  • Extremely smooth, steady movement with less breakaway
  • Effective sealing whilst providing the option of reducing the weight of the unit

Application

  • Low and medium pressure applications
  • Pressure ring may be extended by the utilization of supporting back up rings

Fluids

  • Mineral based oils, water/glycol and water emulsions

PAV2

Material:  NBR
Pressure: 16 bar
Speed: 1 m/s
Temperature: -30 to +110°C
Material:  VITON
Pressure: 16 bar
Speed: 1 m/s
Temperature: -30 to +110°C
Material: ORSP
Pressure: 16 bar
Speed: 1 m/s
Temperature: -40 to + 1200°C

Features+

  • PAV2 Pneumatic Seal
  • Design is adapted to low speed and high pressure situations
  • Extremely smooth, steady movement with less breakaway
  • Effective sealing whilst providing the option of reducing the weight of the unit

Application

  • Low and medium pressure applications
  • Pressure ring may be extended by the utilization of supporting back up rings

Fluids

  • Mineral based oils, water/glycol and water emulsions

PAD1

Material: NBR
Pressure: 16 bar
Speed: 1 m/s
Temperature: -30 to +110°C
Material: ORSP
Pressure: 16 bar
Speed: 1 m/s
Temperature: -40 to + 120°C

Features+

  • PAD1 Pneumatic Seal
  • Design is adapted to low speed and high pressure situations
  • Extremely smooth, steady movement with less breakaway
  • Effective sealing whilst providing the option of reducing the weight of the unit

Application

  • Low and medium pressure applications
  • Pressure ring may be extended by the utilization of supporting back up rings

Fluids

  • Mineral based oils, water/glycol and water emulsions

PAD2

Material: NBR
Pressure: 16 bar
Speed: 1 m/s
Temperature: -30 to + 110°C
Material: ORSP
Pressure: 16 bar
Speed: 1 m/s
Temperature: -40 to +120°C

Features+

  • PAD2 Pneumatic Seal
  • Design is adapted to low speed and high pressure situations
  • Extremely smooth, steady movement with less breakaway
  • Effective sealing whilst providing the option of reducing the weight of the unit

Application

  • Low and medium pressure applications
  • Pressure ring may be extended by the utilization of supporting back up rings

Fluids

  • Mineral based oils, water/glycol and water emulsions

PAS1

Material: NBR
Pressure: 16 bar
Speed: 1 m/s
Temperature: -30 to +110°C
Material:  VITON
Pressure: 300 bar
Speed: 1 m/s
Temperature: -20 to + 200°C
Material: ORSP
Pressure: 16 bar
Speed: 1 m/s
Temperature: -40 to +1200°C

Features+

  • PAS1 Pneumatic Seal
  • Design is adapted to low speed and high pressure situations
  • Extremely smooth, steady movement with less breakaway
  • Effective sealing whilst providing the option of reducing the weight of the unit

Application

  • Low and medium pressure applications
  • Pressure ring may be extended by the utilization of supporting back up rings

Fluids

  • Mineral based oils, water/glycol and water emulsions

PAS3

Material: NBR
Pressure: 16 bar
Speed: 1 m/s
Temperature: -30 to +110°C
Material:  VITON
Pressure: 16 bar
Speed: 1 m/s
Temperature: – 20 to + 200°C
Material: ORSP
Pressure: 16 bar
Speed: 1 m/s
Temperature: -40 to + 1200°C

Features+

  • PAS3 Pneumatic Seal
  • Design is adapted to low speed and high pressure situations
  • Extremely smooth, steady movement with less breakaway
  • Effective sealing whilst providing the option of reducing the weight of the unit

Application

  • Low and medium pressure applications
  • Pressure ring may be extended by the utilization of supporting back up rings

Fluids

  • Mineral based oils, water/glycol and water emulsions

PAS4

Material: NBR
Pressure: 16 bar
Speed: 1 m/s
Temperature: -30 to +110°C
Material:  VITON
Pressure: 16 bar
Speed: 1 m/s
Temperature: -20 to + 200°C
Material: ORSP
Pressure: 16 bar
Speed: 1 m/s
Temperature: -40 to + 1200°C

Features+

  • PAS4 Pneumatic Seal
  • Design is adapted to low speed and high pressure situations
  • Extremely smooth, steady movement with less breakaway
  • Effective sealing whilst providing the option of reducing the weight of the unit

Application

  • Low and medium pressure applications
  • Pressure ring may be extended by the utilization of supporting back up rings

Fluids

  • Mineral based oils, water/glycol and water emulsions

PAE9

Material: NBR
Pressure: 12 bar
Speed: 2 m/s
Temperature: -30 to + 90°C

Features+

  • PAE9 Pneumatic Seal
  • Design is adapted to low speed and high pressure situations
  • Extremely smooth, steady movement with less breakaway
  • Effective sealing whilst providing the option of reducing the weight of the unit

Application

  • Low and medium pressure applications
  • Pressure ring may be extended by the utilization of supporting back up rings

Fluids

  • Mineral based oils, water/glycol and water emulsions

PAS6

Material: NBR
Pressure: 16 bar
Speed: 1 m/s
Temperature: -30 to + 110°C
Material:  VITON
Pressure: 16 bar
Speed: 1 m/s
Temperature: -20 to + 200°C
Material: ORSP
Pressure: 16 bar
Speed: 1 m/s
Temperature: -40 to +1200°C

Features+

  • PAS6 Pneumatic Seal
  • Design is adapted to low speed and high pressure situations
  • Extremely smooth, steady movement with less breakaway
  • Effective sealing whilst providing the option of reducing the weight of the unit

Application

  • Low and medium pressure applications
  • Pressure ring may be extended by the utilization of supporting back up rings

Fluids

  • Mineral based oils, water/glycol and water emulsions

PAS6SU

Material: ORSP / NBR / VITON
Pressure: 500 bar
Speed: 0.5 m/s
Temperature: -40 to +120°C

Features+

  • PAS6SU Pneumatic Seal
  • Design is adapted to low speed and high pressure situations
  • Extremely smooth, steady movement with less breakaway
  • Effective sealing whilst providing the option of reducing the weight of the unit

Application

  • Low and medium pressure applications
  • Pressure ring may be extended by the utilization of supporting back up rings

Fluids

  • Mineral based oils, water/glycol and water emulsions

PAS7

Material: NBR
Pressure: 16 bar
Speed: 1 m/s
Temperature: -30 to +110°C
Material:  VITON
Pressure: 16 bar
Speed: 1 m/s
Temperature: -20 to + 200°C
Material: ORSP
Pressure: 16 bar
Speed: 1 m/s
Temperature: -40 to +1200°C

Features+

  • PAS7 Pneumatic Seal
  • Design is adapted to low speed and high pressure situations
  • Extremely smooth, steady movement with less breakaway
  • Effective sealing whilst providing the option of reducing the weight of the unit

Application

  • Low and medium pressure applications
  • Pressure ring may be extended by the utilization of supporting back up rings

Fluids

  • Mineral based oils, water/glycol and water emulsions

PAS7PDU

Material: NBR
Pressure: 16 bar
Speed: 1 m/s
Temperature: -30 to +110°C
Material:  VITON
Pressure: 16 bar
Speed: 1 m/s
Temperature: -20 to + 200°C
Material: ORSP
Pressure: 16 bar
Speed: 1 m/s
Temperature: -40 to +1200°C

Features+

  • PAS7 Pne
  • PAS7PDU Pneumatic Seal
  • Design is adapted to low speed and high pressure situations
  • Extremely smooth, steady movement with less breakaway
  • Effective sealing whilst providing the option of reducing the weight of the unit

Application

  • Low and medium pressure applications
  • Pressure ring may be extended by the utilization of supporting back up rings

Fluids

  • Mineral based oils, water/glycol and water emulsions

PAS8

Material: NBR
Pressure: 16 bar
Speed: 1 m/s
Temperature: -30 to +110°C
Material:  VITON
Pressure: 16 bar
Speed: 1 m/s
Temperature: -20 to + 200°C
Material: ORSP
Pressure: 16 bar
Speed: 1 m/s
Temperature: -40 to +1200°C

Features+

  • PAS8 Pneumatic Seal
  • Design is adapted to low speed and high pressure situations
  • Extremely smooth, steady movement with less breakaway
  • Effective sealing whilst providing the option of reducing the weight of the unit

Application

  • Low and medium pressure applications
  • Pressure ring may be extended by the utilization of supporting back up rings

Fluids

  • Mineral based oils, water/glycol and water emulsions

PAS9

Material: NBR
Pressure: 16 bar
Speed: 1 m/s
Temperature: -30 to +110°C
Material: VITON
Pressure: 16 bar
Speed: 1 m/s
Temperature: -20 to + 200°C
Material: ORSP
Pressure: 16 bar
Speed: 1 m/s
Temperature: -40 to + 1200°C

Features+

  • PAS9 Pneumatic Seal
  • Design is adapted to low speed and high pressure situations
  • Extremely smooth, steady movement with less breakaway
  • Effective sealing whilst providing the option of reducing the weight of the unit

Application

  • Low and medium pressure applications
  • Pressure ring may be extended by the utilization of supporting back up rings

Fluids

  • Mineral based oils, water/glycol and water emulsions

PAK1

Material: ORSP
Pressure: 16 bar
Speed: 1 m/s
Temperature: -30 to +110°C
Material: NBR
Pressure: 16 bar
Speed: 1 m/s
Temperature: -40 to +120°C

Features+

  • PAK1 Pneumatic Seal
  • Design is adapted to low speed and high pressure situations
  • Extremely smooth, steady movement with less breakaway
  • Effective sealing whilst providing the option of reducing the weight of the unit

Application

  • Low and medium pressure applications
  • Pressure ring may be extended by the utilization of supporting back up rings

Fluids

  • Mineral based oils, water/glycol and water emulsions

PAK2

Material: ORSP
Pressure: 16 bar
Speed: 1 m/s
Temperature: -30 to + 110°C
Material:  NBR
Pressure: 16 bar
Speed: 1 m/s
Temperature: -40 to +120°C

Features+

  • PAK2 Pneumatic Seal
  • Design is adapted to low speed and high pressure situations
  • Extremely smooth, steady movement with less breakaway
  • Effective sealing whilst providing the option of reducing the weight of the unit

Application

  • Low and medium pressure applications
  • Pressure ring may be extended by the utilization of supporting back up rings

Fluids

  • Mineral based oils, water/glycol and water emulsions

PAK3

Material:  NBR
Pressure: 16 bar
Speed: 1 m/s
Temperature: -30 to +110°C
Material: ORSP
Pressure: 16 bar
Speed: 1 m/s
Temperature: -40 to + 120°C

Features+

  • PAK3 Pneumatic Seal
  • Design is adapted to low speed and high pressure situations
  • Extremely smooth, steady movement with less breakaway
  • Effective sealing whilst providing the option of reducing the weight of the unit

Application

  • Low and medium pressure applications
  • Pressure ring may be extended by the utilization of supporting back up rings

Fluids

  • Mineral based oils, water/glycol and water emulsions

PK6SU

Material: ORSP / NBR / VITON
Pressure: 500 bar
Speed: 0.5 m/s
Temperature: -40 to +120°C

Features+

  • PK6SU Pneumatic Seal
  • Design is adapted to low speed and high pressure situations
  • Extremely smooth, steady movement with less breakaway
  • Effective sealing whilst providing the option of reducing the weight of the unit

Application

  • Low and medium pressure applications
  • Pressure ring may be extended by the utilization of supporting back up rings

Fluids

  • Mineral based oils, water/glycol and water emulsions

DAP

Material: ORSP / NBR / VITON
Pressure: 400 bar
Speed: 1 m/s
Temperature: -30 to +110°C

Features+

  • DAP Pneumatic Seal
  • Design is adapted to low speed and high pressure situations
  • Extremely smooth, steady movement with less breakaway
  • Effective sealing whilst providing the option of reducing the weight of the unit

Application

  • Low and medium pressure applications
  • Pressure ring may be extended by the utilization of supporting back up rings

Fluids

  • Mineral based oils, water/glycol and water emulsions

DAPS

Material: ORSP / NBR / VITON
Pressure: 500 bar
Speed: 0.5 m/s
Temperature: -40 to +120°C

Features+

  • DAPS Pneumatic Seal
  • Design is adapted to low speed and high pressure situations
  • Extremely smooth, steady movement with less breakaway
  • Effective sealing whilst providing the option of reducing the weight of the unit

Application

  • Low and medium pressure applications
  • Pressure ring may be extended by the utilization of supporting back up rings

Fluids

  • Mineral based oils, water/glycol and water emulsions

PADK

Material: ORSP / NBR / VITON
Pressure: 400 bar
Speed: 1 m/s
Temperature: -30 to +110°C

Features+

  • PADK Pneumatic Seal
  • Design is adapted to low speed and high pressure situations
  • Extremely smooth, steady movement with less breakaway
  • Effective sealing whilst providing the option of reducing the weight of the unit

Application

  • Low and medium pressure applications
  • Pressure ring may be extended by the utilization of supporting back up rings

Fluids

  • Mineral based oils, water/glycol and water emulsions

PAEK

Material: ORSP / NBR / VITON
Pressure: 500 bar
Speed: 0.5 m/s
Temperature: -40 to +120°C

Features+

  • PAEK Pneumatic Seal
  • Design is adapted to low speed and high pressure situations
  • Extremely smooth, steady movement with less breakaway
  • Effective sealing whilst providing the option of reducing the weight of the unit

Application

  • Low and medium pressure applications
  • Pressure ring may be extended by the utilization of supporting back up rings

Fluids

  • Mineral based oils, water/glycol and water emulsions

PADE

Material: ORSP / NBR / VITON
Pressure: 400 bar
Speed: 1 m/s
Temperature: -30 to +110°C

Features+

  • PADE Pneumatic Seal
  • Design is adapted to low speed and high pressure situations
  • Extremely smooth, steady movement with less breakaway
  • Effective sealing whilst providing the option of reducing the weight of the unit

Application

  • Low and medium pressure applications
  • Pressure ring may be extended by the utilization of supporting back up rings

Fluids

  • Mineral based oils, water/glycol and water emulsions

PAK7

Material: ORSP / NBR / VITON
Pressure: 500 bar
Speed: 0.5 m/s
Temperature: -40 to +120°C

Features+

  • PAK7 Pneumatic Seal
  • Design is adapted to low speed and high pressure situations
  • Extremely smooth, steady movement with less breakaway
  • Effective sealing whilst providing the option of reducing the weight of the unit

Application

  • Low and medium pressure applications
  • Pressure ring may be extended by the utilization of supporting back up rings

Fluids

  • Mineral based oils, water/glycol and water emulsions

PAK8

Material: ORSP / NBR / VITON
Pressure: 400 bar
Speed: 1 m/s
Temperature: -30 to +110°C

Features+

  • PAK8 Pneumatic Seal
  • Design is adapted to low speed and high pressure situations
  • Extremely smooth, steady movement with less breakaway
  • Effective sealing whilst providing the option of reducing the weight of the unit

Application

  • Low and medium pressure applications
  • Pressure ring may be extended by the utilization of supporting back up rings

Fluids

  • Mineral based oils, water/glycol and water emulsions

PAK9

Material: ORSP / NBR / VITON
Pressure: 500 bar
Speed: 0.5 m/s
Temperature: -40 to +120°C

Features+

  • PAK9 Pneumatic Seal
  • Design is adapted to low speed and high pressure situations
  • Extremely smooth, steady movement with less breakaway
  • Effective sealing whilst providing the option of reducing the weight of the unit

Application

  • Low and medium pressure applications
  • Pressure ring may be extended by the utilization of supporting back up rings

Fluids

  • Mineral based oils, water/glycol and water emulsions

PAK11

Material: ORSP / NBR / VITON
Pressure: 400 bar
Speed: 1 m/s
Temperature: -30 to +110°C

Features+

  • PAK11 Pneumatic Seal
  • Design is adapted to low speed and high pressure situations
  • Extremely smooth, steady movement with less breakaway
  • Effective sealing whilst providing the option of reducing the weight of the unit

Application

  • Low and medium pressure applications
  • Pressure ring may be extended by the utilization of supporting back up rings

Fluids

  • Mineral based oils, water/glycol and water emulsions

PSD

Material: ORSP / NBR / VITON
Pressure: 500 bar
Speed: 0.5 m/s
Temperature: -40 to +120°C

Features+

  • PSD Pneumatic Seal
  • Design is adapted to low speed and high pressure situations
  • Extremely smooth, steady movement with less breakaway
  • Effective sealing whilst providing the option of reducing the weight of the unit

Application

  • Low and medium pressure applications
  • Pressure ring may be extended by the utilization of supporting back up rings

Fluids

  • Mineral based oils, water/glycol and water emulsions

DZG

Material: ORSP / NBR / VITON
Pressure: 400 bar
Speed: 1 m/s
Temperature: -30 to +110°C

Features+

  • DZG Pneumatic Seal
  • Design is adapted to low speed and high pressure situations
  • Extremely smooth, steady movement with less breakaway
  • Effective sealing whilst providing the option of reducing the weight of the unit

Application

  • Low and medium pressure applications
  • Pressure ring may be extended by the utilization of supporting back up rings

Fluids

  • Mineral based oils, water/glycol and water emulsions

DZL

Material: ORSP / NBR / VITON
Pressure: 500 bar
Speed: 0.5 m/s
Temperature: -40 to +120°C

Features+

  • DZL Pneumatic Seal
  • Design is adapted to low speed and high pressure situations
  • Extremely smooth, steady movement with less breakaway
  • Effective sealing whilst providing the option of reducing the weight of the unit

Application

  • Low and medium pressure applications
  • Pressure ring may be extended by the utilization of supporting back up rings

Fluids

  • Mineral based oils, water/glycol and water emulsions

CUP-L

Material: ORSP / NBR / VITON
Pressure: 400 bar
Speed: 1 m/s
Temperature: -30 to +110°C

Features+

  • CUP-L Pneumatic Seal
  • Design is adapted to low speed and high pressure situations
  • Extremely smooth, steady movement with less breakaway
  • Effective sealing whilst providing the option of reducing the weight of the unit

Application

  • Low and medium pressure applications
  • Pressure ring may be extended by the utilization of supporting back up rings

Fluids

  • Mineral based oils, water/glycol and water emulsions

CUP-F

Material: ORSP / NBR / VITON
Pressure: 500 bar
Speed: 0.5 m/s
Temperature: -40 to +120°C

Features+

  • CUP-F Pneumatic Seal
  • Design is adapted to low speed and high pressure situations
  • Extremely smooth, steady movement with less breakaway
  • Effective sealing whilst providing the option of reducing the weight of the unit

Application

  • Low and medium pressure applications
  • Pressure ring may be extended by the utilization of supporting back up rings

Fluids

  • Mineral based oils, water/glycol and water emulsions

CUP-N

Material: ORSP / NBR / VITON
Pressure: 400 bar
Speed: 1 m/s
Temperature: -30 to +110°C

Features+

  • CUP-N Pneumatic Seal
  • Design is adapted to low speed and high pressure situations
  • Extremely smooth, steady movement with less breakaway
  • Effective sealing whilst providing the option of reducing the weight of the unit

Application

  • Low and medium pressure applications
  • Pressure ring may be extended by the utilization of supporting back up rings

Fluids

  • Mineral based oils, water/glycol and water emulsions