Get a Quote
Key in your name, email address, the material dimensions and materials to get a quote from the Oz Team. If you need one of our seal experts to double check that you have purchased the right seal for your application, you can add in your drawing dimensions or a picture of the seal.
Get in touch
Oz Seals operates at two major branches: the headquarters located in Logan, Queensland and a strong branch in Tullamarine, Victoria. If you have an enquiry, please don’t hesitate to ask us via the form to the right or by calling 1300 792 600.
QUEENSLAND (BRISBANE BRANCH)Unit 6 / 3507 Pacific Highway,
(Behind Beaumont Tiles)
Slacks Creek, QLD 4127
Phone: (07) 3290 1846
Fax: (07) 3208 6235
VICTORIA (MELBOURNE BRANCH)Unit 9, 67-75 Garden Drive,
Tullamarine, VIC 3043
Phone: (03) 9335 5699
Fax: (03) 9335 5799
NEW SOUTH WALESPhone: (02) 9620 8382
Fax: (02) 9620 8381
6912 Gemeinde Horbranz
Frequently Asked Questions
GENERAL SEAL ENQUIRIES
1. Do you manufacture seals?
Yes we do. Our online division, Sealnet, offers the largest range of standard seals. We also specialise in machining custom made, special seals up to 2000mm in diameter. You can be sure that all our seals are manufactured from materials meeting the highest quality standards.
2. Do you make one of seals?
Yes. Just drop us an email with an attached picture or drawing of the seal to firstname.lastname@example.org. Our friendly sales team will respond to you as soon as possible, generally within a few hours. If you do not hear from us within 24hours, kindly give us a call at (07) 3290 1846 (QLD).
3. How quickly do you manufacture a seal?
With Oz Seals innovative manufacturing system and software, we are able to manufacture any seal which you require within 10-15 minutes, depending on the size and difficulty of the seal profile.
4. Can you replicate a seal?
Of course we can! Just send us over your seal sample or drawing at email@example.com to wither our Melbourne or Brisbane branch and we can start manufacturing the seal for you in no time.
1. What details should i provide, if i need a seal manufactured?
To better understand your requirements, we would need:
- Type of seal (or alternatively, you can reference one of the profiles from our profile chart)*
- Inside Diameter*
- Outside Diameter*
- Height/thickness (please include all height measurements if applicable)*
- (Does it come into contact with any oil, hot water, steam or chemicals?)
- Operating temperature
- Slide speed
* indicates essential information
2. What if I can only provide partial details?
If you have a part number or seal sample which you can show us, that would be perfect! However, in some cases, we would need to see the housing unit in which the seal sits. If you are delivering a seal or a seal part to us, do let us know beforehand by calling either the QLD Branch @ (07) 3290 1846 or the Melbourne Branch @ (03) 9335 5699.
3. I need help determining the type of seal I require.
At Oz Seals, we provide services including failure analysis, seal design and FE analysis. If you need help quickly and would like to chat, call Wilhelm on (07) 3290 1846.
4. I am unsure about the material compatibility.
Material datasheets/MSDS are available on Sealnet under Oz Rom. For specific enquiries, you may call us or drop us an email.
1. How can I get a special discount?
We offer discounts for loyal clients and larger quantities. If you would like to ask us about a special discount, just give us a call. To enquire about setting up an account with us, please email us for an account application form.
1. I have a feedback regarding the website.
We love to hear from our customers! Your feedback is greatly appreciated and will help us to improve our ability to serve you and other users of our website better!
Just drop us an email at firstname.lastname@example.org.